Newton Conveyors, Inc.

                    Hangers

Hanger Bearings provide intermediate radial support between separate screw sections.  Since hanger bearings are designed primarily for radial loads, 1/8" clearance should be allowed between the bearing and the conveyor pipe ends to prevent damage from thrust loads transmitted by the conveyor pipe.  All Newton Conveyors' hangers are manufactured to exacting tolerances from the highest quality raw materials.

216 Style Hanger

216 Style Hangers are recommended for heavy duty, abrasive applications, especially where dust tight operation is required.  216 Hangers may be furnished with hard iron, hard surfaced or oil impregnated wood bearings, see Hanger Bearings. When hard iron or hand surfaced bearings are used, hardened or hard surfaced shafts are required.  The hanger is mounted inside, flush with top flanges.
216 Hanger

Back To Screw Conveyor Parts Catalog Index

220 Style Hanger

220 Style Hangers are recommended for high capacity conveyors where dust tight operation is not required.  Slender frame and compact bearing housing allow higher percentage of conveyor loading with minimum flow obstruction.  Available in all friction type bearing materials.  See Hanger Bearings
220 hanger

Back To Screw Conveyor Parts Catalog Index

226 Style Hanger

226 Style Hangers are recommended for high capacity conveyors where dust tight operation is required.  Slender frame and compact bearing housing allow higher percentage of conveyor loading with minimum flow obstruction.  226 hangers are designed inside flush mounting.  Available in all friction type bearing materials.  See Hanger Bearings
226 Hanger

Back To Screw Conveyor Parts Catalog Index

230 Style Hanger

230 Style Hangers are designed for heavy duty applications where top mounting on the trough flange is preferred.  May be furnished with either hard iron bearings (with hardened or hard surfaced shafts) or oil impregnated wood bearings, see Hanger Bearings .  Bearing and bearing assembly frame are readily interchangeable with style 216 top frames.
230 Hanger

Back To Screw Conveyor Parts Catalog Index

326 Style Hanger

326 Style Hangers are well suited for high temperature operation and incorporate the basic features of the 220 and 226 hangers.  the 326 is designed for interior trough mounting with self adjusting assembly to compensate for unequal thermal expansion between components.  Available only with hard iron or hard surfaced bearing, see Hanger Bearings .  Hardened or hard surfaced shafts are required.
326 Hanger

Back To Screw Conveyor Parts Catalog Index

30 Style Hanger 

30 Style Hangers are designed for minimum obstruction of material flow.  Bearing is supported from the non carrying side of the conveyor housing.  For extra support, top bar extends across the trough and bolts on both sides.  Mounts flush with trough flanges.  Available in all friction type bearing materials, see Hanger Bearings. 

30 Hanger

Back To Screw Conveyor Parts Catalog Index

Ball bearing type hangers available upon request.  Flared hangers available in all the above styles except Style 30 Hanger.

Screw Conveyors

Online Catalogs

Drag Conveyors

Conveyor Album

Bucket Elevators

Index Page

Belt Conveyors

NCI  Home

Conveyor Screws

Sales Reps Wanted

Phone 817-558-1768

E-mail

Fax 817-558-2219

Mail To:

Newton Conveyors, Inc.

P. O. Box 816

Cleburne, Texas 76033

Deliveries:

Newton Conveyors, Inc.

1204 C. R. 1123

Cleburne, Texas 76033