The Plate Seal is an economical, effective sealing device designed for exterior mounting between the end bearing and the conveyor housing end.  Standard units include lip type seals, but other types of commercial seal cartridges may also be used.  the plate seal and the end bearing are attached by means of common bolts.  The plate may also be attached independently when outboard bearing ends are used.

This universal type seal is designed for use with waste packing or cartridge type lip or felt seals.  An opening at the top of the housing facilitates waste packing.  The packing material is partially exposed for oiling.  The packing seal housing is mounted outside between the end bearing and the conveyor end.  It may also be mounted independently for use with the outboard bearing end.

Split Gland Seal

The Split Gland Seal provides an effective seal by compression of the packing which is contained in a split housing to facilitate assembly and replacement of the packing material.  Packing pressure may be adjusted by means of two exposed nuts at the top half of the seal housing.

The Packed Gland Seal is a highly effective means of sealing the conveyor both internally and externally.  This seal also is suitable for pressure or vacuum service.  Mechanical compression of the packing material is accomplished by means of two compression bolts.  Available in two types, weld on and bolt on.  Designed for use with outboard bearing ends

Screw Conveyors

Online Catalogs

Drag Conveyors

Conveyor Album

Bucket Elevators

Index Page

Belt Conveyors

NCI  Home

Conveyor Screws

Sales Reps Wanted

Phone 817-558-1768

E-mail

Fax 817-558-2219

Mail To:

Newton Conveyors, Inc.

P. O. Box 816

Cleburne, Texas 76033

Deliveries:

Newton Conveyors, Inc.

1204 C. R. 1123

Cleburne, Texas 76033